INTERMEDIATE GEAR |
Post Reply |
Author | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
gajeepguy
Member Joined: 10 Sep. 2011 Location: United States Status: Offline Points: 12 |
Post Options
Thanks(0)
Posted: 16 Feb. 2012 at 4:44pm |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hello, I have an intermediate gear from a CJ-2A that is marked 18-5-7. The only one that I can find tp replace it is marked 18-5-9. Are they interchangeable and what, if anything, is the difference? Thanks,
Gajeepguy
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
gajeepguy
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
samcj2a
Member Sponsor Member x 5 Joined: 21 Oct. 2006 Location: Arlington, VA Status: Offline Points: 8549 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
I am not familiar with the term, "intermediate gear" for the CJ-2A. Perhaps you can identify which gear you mean by referring to the parts figures, below. I speculate that you mean second gear, but knowing for sure might help someone answer your question.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
gajeepguy
Member Joined: 10 Sep. 2011 Location: United States Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sorry, the intermediate gear is in the transfer case. It's the big one in the middle with two sets of teeth on it. I hope this clears it up. Thanks.
Gajeepguy
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
gajeepguy
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
rocketeer
Member Sponsor Member Joined: 26 June 2008 Location: Lehighton, PA Status: Offline Points: 3473 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
They are not interchangeable.
18-5-7 (1946-1954) ---------------------- 34 teeth x 20deg x 21 teeth 18-5-9 (1955-1971) ---------------------- 39 teeth x 20deg x 18 teeth Larry |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
gajeepguy
Member Joined: 10 Sep. 2011 Location: United States Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OK, thank you very much. I'll keep looking for the right one. Thanks again.
Gajeepguy
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
gajeepguy
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CW48
Member Joined: 19 Aug. 2007 Location: Fayetteville, GA Status: Offline Points: 234 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
You should also check your intermediate shaft size..is it 3/4 inch, 1 1/8 inch or 1 1/4 inch.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Happiness is a Southbend Lathe
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
tumbleweed
Member Joined: 31 Jan. 2011 Location: Bedford, Texas Status: Offline Points: 654 |
Post Options
Thanks(0)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Go to the Novac web site I think this will help with gear numbers, etc.
George The Novak Guide to
|
Dana Model | Pressure angle, in degrees | Drive Gear: Dana & Jeep #'s | Gear teeth x Spline count | Intermediate Gear: Dana & Jeep #'s | Gear teeth counts | Front Output Gear | Gear teeth count | Front Sliding Gear: Dana & Jeep #'s | Gear teeth count | Rear Sliding Gear: Dana & Jeep #'s | Gear teeth count | With Transmissions | Idler Shaft Diameter | Jeeps | Years | Low Ratio |
18 | 20 | 18-8-7, A-1510 |
27t x 6 | 18-5-1, A-999 |
18-8-2, A-989 |
27t | 18-8-1, A-988 |
n/a | T84 | 3/4" | MB, GPW | 41-45 | 1.97 | |||
18 | 20 | 18-8-19, 937339, (a) |
26t x 6 | 18-5-7, 642189 |
34t x 21t | 18-8-18, A15044 |
26t | 18-8-17, A15045 |
39t | n/a | T90 | 1-1/8" | All. CJ3B before s/n 541-2506. Military M38 & M38A1 | 46-54 | 2.46 | |
18 | 20 | 18-8-23, 809297 |
29t x 6 | 18-5-9, 809293 |
39t x 18t | 18-8-24, 809291 |
29t | 18-8-22, 809290 |
33t | n/a | T90, T86 | 1-1/4" | CJ, Early Style Pickups & Wagons. Four cylinder to '71, V6 to '68. Both new & old body style built between '62-64. CJ3B built after s/n 541-2506. | 55-71 | 2.46 | |
18 | 20 | 18-8-50, 947382 |
29t x 10 | 18-5-9, 809293 |
39t x 18t | 18-8-24, 809291 |
29t | 18-8-22 809290 |
33t | n/a | T14 | 1-1/4" | CJ with Buick V6. | 68-71 | 2.46 | |
20 | 20 | 18-8-31, 937339, (a) |
26t x 6 | 18-5-10, 933736 |
34t x 20t | 18-8-18, A15044 |
26t | 18-8-28, 933735 |
31t | 18-8-26, 933742 |
31t | T98, T18, T90 | 1-1/4" | Late style Kaiser J series Pickups & Wagons. Also '76-'79 CJ's with T18 | 62-79 | 2.03 |
20 | 17.5 | 18-8-46, 946574, (b) |
26t x 6 | 18-5-16, 946786 |
34t x 20t | 18-8-28, 933735 |
26t | 18-8-28, 933735 |
31t | 18-8-26, 933742 |
31t | T18, T15, T89, T98 | 1-1/4" | Late style Kaiser J series Pickups & Wagons. Jeepster | 66-79 | 2.03 |
20 | 20 | 18-8-40, 940472 |
26t x 15 | 18-5-10, 933736 |
34t x 20t | 18-8-18, A15044 |
26t | 18-8-28, 933735 |
31t | 18-8-26, 933742 |
31t | TH400 | 1-1/4" | Late style Kaiser J series Pickups & Wagons | 64-79 | 2.03 |
20 | 17.5 | 18-8-43, 946785 |
26t x 15 | 18-5-16, 946786 |
34t x 20t | 18-8-44, 946784 |
26t | 18-8-28, 933735 |
31t | 18-8-26, 933742 |
31t | TH400 | 1-1/4" | Jeepster | 66-72 | 2.03 |
20 | 17.5 | 18-8-49, 947339 |
26t x 10 | 18-5-16, 946786 |
34t x 20t | 18-8-44, 946784 |
26t | 18-8-28, 933735 |
31t | 18-8-26, 933742 |
31t | T14 | 1-1/4" | Jeepster, CJ | 67-74 | 2.03 |
20 | 17.5 | 18-8-55, 5354506, (b) |
26t x 6 | 18-5-16, 946786 |
34t x 20t | 18-8-44, 946784 |
26t | 18-8-28, 933736 |
31t | 18-8-26, 933742 |
31t | T150 | 1-1/4" | CJ | 76-79 | 2.03 |
20 | 17.5 | 18-8-56 | 26t x 23 | 18-5-16, 946787 |
34t x 20t | 18-8-44, 946784 |
26t | 18-8-28, 933737 |
31t | 18-8-26, 933742 |
31t | TF727, 904, 909 | 1-1/4" | IH Scout | -79 | 2.03 |
20 | 20 | 18-8-33 | 29t x 6 | 18-5-9, 809293 |
39t x 18t | 18-8-24, 809291 |
29t | 18-8-35 | 33t | 18-8-37 (c) |
33t | 1-1/4" | Bronco | 66-72 | 2.46 | |
20 | 18-8-24 | 29t x 6 | 18-5-21 | 39t x 18t | 18-8-24, 809291 |
29t | 18-8-57 | 33t | 18-8-58 | 33t | 1-1/4" | Bronco | 73-74 | 2.46 | ||
20 | 18-8-64 | 29t x 6 | 18-5-21 | 39t x 18t | 18-8-24, 809291 |
29t | 18-8-66 | 33t | 18-8-65 | 33t | 1-1/4" | Bronco | 75-77 | 2.46 | ||
a.
Yes b. Special seal area machined into the front face of gear for T150. Interchanges when not used with T-150. |
Intermediate gear bores are identical for 1-1/8" and 1-1/4" applications. | c. The Bronco gear used for Jeep Dana 20, 2.46:1 conversions |
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |