![]() |
![]() |
Windshield frame quality |
Post Reply ![]() |
Page 12> |
Author | |
I got the Willys ![]() Member ![]() ![]() Joined: 10 June 2012 Location: Western NY Status: Offline Points: 484 |
![]() ![]() ![]() ![]() ![]() Posted: 14 July 2013 at 5:53pm |
I just patched and welded the 2A windshield frame for the third time.It solid now but ugly and will likely crack again so time for a new frame. Be nice if i could buy just the outer part since my Jeeps inner frame is good with newer glass.
I assume the frames sold by the usual vendors are made in Asia? Has anyone bought one that seen some use so you can say it's held up ok? Pete Debella has his listed as "price on request"...generally he has surplus or USA made parts... |
|
47 CJ2A, 51 Willys PU,his and hers 99 XJ 5 speed 4x4
Willys Jeep,what the victorious US troops drove into Tokyo |
|
![]() |
|
TheRaven ![]() Member ![]() ![]() Joined: 18 July 2012 Location: Norumbega Status: Offline Points: 263 |
![]() ![]() ![]() ![]() ![]() |
I would tend to stay away from Debella as he does have an attitude...but his parts are pretty good. Another option would be to put a wanted ad up here and elsewhere. Sometimes eBay has good origionals up. My MB had a bad inner frame and it was replaced with another origional in good shape from the west.
I would avoid any Asian parts on these jeeps |
|
Effected by the Rule of Unitended Consequence. All the best -R
|
|
![]() |
|
russnj ![]() Admin ![]() ![]() Webmaster Joined: 20 July 2005 Location: W. Windsor, NJ Status: Offline Points: 3943 |
![]() ![]() ![]() ![]() ![]() |
To actually answer a couple of questions, the repro windshield frames are all from MD Juan as far as I know.
My repro MB windshield frame has been ok for 7 years, it's been bent a few times but it still holds up. I may have an extra original in a few weeks if you are not in a hurry. |
|
![]() 43 MB, 48 CJ2A, 50 CJ3A, 55 M38A1, 56 CJ5, 79 M151A2, M100 ,65 M416 |
|
![]() |
|
Lee MN ![]() Member ![]() ![]() Joined: 13 Aug. 2008 Location: Harris, MN Status: Offline Points: 4949 |
![]() ![]() ![]() ![]() ![]() |
Midwest military makes very nice ones, and "made in USA"
here is a link, must specify CJ2Ahttp://www.midwestmilitary.net/mbgpwpartsp2.html HTH, Lee ![]() |
|
LEE
44 GPW-The Perfected Willys 49 2A “If you wait, you only get older” 67 M715 American Made Rolling History |
|
![]() |
|
autolite ![]() Member ![]() ![]() Joined: 15 Apr. 2006 Location: San Mateo, Cali Status: Offline Points: 788 |
![]() ![]() ![]() ![]() ![]() |
Russnj, what were the curcumstances to your windshield being bent a few times? Just curious.
|
|
willys jeep
|
|
![]() |
|
I got the Willys ![]() Member ![]() ![]() Joined: 10 June 2012 Location: Western NY Status: Offline Points: 484 |
![]() ![]() ![]() ![]() ![]() |
PM sent
|
|
47 CJ2A, 51 Willys PU,his and hers 99 XJ 5 speed 4x4
Willys Jeep,what the victorious US troops drove into Tokyo |
|
![]() |
|
Hoosierhiker33 ![]() Member ![]() Joined: 29 Apr. 2012 Location: Indiana Status: Offline Points: 315 |
![]() ![]() ![]() ![]() ![]() |
i have an outer you could for parts, the arms are shot but the rest is soild.Send a pm if interested
|
|
Patina is for those without sand blasters.
|
|
![]() |
|
I got the Willys ![]() Member ![]() ![]() Joined: 10 June 2012 Location: Western NY Status: Offline Points: 484 |
![]() ![]() ![]() ![]() ![]() |
The arms are shot on mine. One was previously rusted and sorta repaired with a lot of brazing years ago.I cut out the brazed area and hand formed sheet metal. Then it cracks and inch away,fix that,cracks again. The metal is fatigued.....The main section is well used but functional.
It's ok for now ....until it cracks again.
![]() |
|
47 CJ2A, 51 Willys PU,his and hers 99 XJ 5 speed 4x4
Willys Jeep,what the victorious US troops drove into Tokyo |
|
![]() |
|
damar2yxr ![]() Member ![]() Sponsor Member x 2 Joined: 23 Aug. 2010 Location: Watertown, Wisc Status: Offline Points: 2632 |
![]() ![]() ![]() ![]() ![]() |
Don't be too down on MD Juan. They have been making great strides in product improvements. You might be surprised.................a good original is always a better find.
![]() |
|
eat,sleep,jeep
Proud father of a Marine, Army Dentist, Navy Pilot and a Princess. LIFE IS GOOD! 43MB,47CJ2-A,48CJ2-A X2,70Jeepster Commando 1/2 cab,84CJ-7, |
|
![]() |
|
TheRaven ![]() Member ![]() ![]() Joined: 18 July 2012 Location: Norumbega Status: Offline Points: 263 |
![]() ![]() ![]() ![]() ![]() |
Never been a big fan of putting foreign made parts on my jeep. MDjuan is a last resort. Here is thier info...there are something there that make me suspect. http://www.mdjuan.com.ph/index.php/about-us/ |
|
Effected by the Rule of Unitended Consequence. All the best -R
|
|
![]() |
|
russnj ![]() Admin ![]() ![]() Webmaster Joined: 20 July 2005 Location: W. Windsor, NJ Status: Offline Points: 3943 |
![]() ![]() ![]() ![]() ![]() |
It was being used as an grab handle while off-roading. |
|
![]() 43 MB, 48 CJ2A, 50 CJ3A, 55 M38A1, 56 CJ5, 79 M151A2, M100 ,65 M416 |
|
![]() |
|
I got the Willys ![]() Member ![]() ![]() Joined: 10 June 2012 Location: Western NY Status: Offline Points: 484 |
![]() ![]() ![]() ![]() ![]() |
Pete Debella does come off a bit rude at first. He's from the NYC area ![]() I called Debella and he only has access to Juan made frames that he said to avoid.... Another link here is to frames made by Mid West...Looking through their site it appears that only make inner frames. I'll wait for a used one to pop up..............
|
|
47 CJ2A, 51 Willys PU,his and hers 99 XJ 5 speed 4x4
Willys Jeep,what the victorious US troops drove into Tokyo |
|
![]() |
|
TheRaven ![]() Member ![]() ![]() Joined: 18 July 2012 Location: Norumbega Status: Offline Points: 263 |
![]() ![]() ![]() ![]() ![]() |
Interesting to hear a good report about Debella. Perhaps he is a bit better than I give him credit for?
|
|
Effected by the Rule of Unitended Consequence. All the best -R
|
|
![]() |
|
I got the Willys ![]() Member ![]() ![]() Joined: 10 June 2012 Location: Western NY Status: Offline Points: 484 |
![]() ![]() ![]() ![]() ![]() |
I've ordered three or four times,bought small parts and a set of leaf springs from Pete.The prices were usually better than competitive, fast shipping with reasonable cost and made in USA parts. Walck's is not like DeBella but sometimes you need to pry the words out of their mouths ![]() |
|
47 CJ2A, 51 Willys PU,his and hers 99 XJ 5 speed 4x4
Willys Jeep,what the victorious US troops drove into Tokyo |
|
![]() |
|
jay g ![]() Member ![]() Joined: 03 Apr. 2013 Location: nbpt ma. Status: Offline Points: 107 |
![]() ![]() ![]() ![]() ![]() |
I have a md juan windshield frame on my 46 I spent about 14 hours cutting it apart and reforming the tube that sits on top of the cowl original lollipops would not work on it either welded an original latch on bottom to keep windshield shut inner frames were scrappy too and needed work originals would not fit in the md juan frame
|
|
Jay g
|
|
![]() |
|
autolite ![]() Member ![]() ![]() Joined: 15 Apr. 2006 Location: San Mateo, Cali Status: Offline Points: 788 |
![]() ![]() ![]() ![]() ![]() |
Thanks Ruusnj for the reply . Been away from the computer for a couple of days. Yes, that will do it no matter if it is an original or repop windshield frame. I tell my wife when she get's into our 45 GPW to use the rifle rack for support, NOT the corner of the windshield frame.
|
|
willys jeep
|
|
![]() |
|
RommelJuan ![]() Member ![]() Joined: 08 Feb. 2013 Location: Philippines Status: Offline Points: 265 |
![]() ![]() ![]() ![]() ![]() |
Keeping em rolling from the Far East!
All for One at MDJuan! http://www.facebook.com/MDJuanjeeps http://www.twitter.com/mdjuanjeepparts |
|
![]() |
|
RommelJuan ![]() Member ![]() Joined: 08 Feb. 2013 Location: Philippines Status: Offline Points: 265 |
![]() ![]() ![]() ![]() ![]() |
Keeping em rolling from the Far East!
All for One at MDJuan! http://www.facebook.com/MDJuanjeeps http://www.twitter.com/mdjuanjeepparts |
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |