Clutch problems |
Post Reply | Page <12 |
Author | |
sean
Moderator Group Sponsor Member Joined: 20 July 2005 Location: North Idaho Status: Offline Points: 7388 |
Post Options
Thanks(0)
|
Is the control tube right-way-around? Short arm to frame side, long arm to transmission side? It can be installed backwards.
Sean |
|
sudsie
Member Sponsor Member Joined: 20 July 2005 Location: , NJ Status: Offline Points: 385 |
Post Options
Thanks(0)
|
Yes the z bar is in right , to me the throw out bearing is coming out far enough as the return spring is really stretched. To me it looks like the clutch fingers are not close enough, but how can that be?
|
|
TOM R
Member Joined: 23 May 2006 Location: VIRGINIA Status: Offline Points: 849 |
Post Options
Thanks(0)
|
pics would help here
|
|
for mg42 talk goto www.mg42.us
46 CJ2A T24/m29 WEASEL 1954 m37 mvpa 31698 nra lifer my project http://www.thecj2apage.com/forums/forum_posts.asp?TID=7008 |
|
Odd Fire Six
Member Joined: 16 Sep. 2006 Location: Laconia NH Status: Offline Points: 63 |
Post Options
Thanks(0)
|
I ran into the same problem when I put the correct trans in my 46.
When purchased, it had a T84 (wrong trans), so the first winter tear down, out went the old, and in went the new T90 (correct trans).
The problem was the transmissions are diffrent lengths, thus the diffrent length clutch rod.
Doug S.
|
|
I'd Rather Be Riding Than Pushing
|
|
Jeff
Member Sponsor Member Joined: 23 July 2005 Location: NH Status: Offline Points: 852 |
Post Options
Thanks(0)
|
Seems to me that the last time I changed my clutch, I had to change the length of the control rod. Not sure why perhaps it was a different clutch manufacturer?
Jeff
|
|
ord.sgt.26NC
Member Joined: 21 Jan. 2007 Location: Goldsboro,North Carolina Status: Offline Points: 19 |
Post Options
Thanks(0)
|
years ago I had a simular problem when I installed a new clutch and pressure plate in my M38.You need to adjust your clutch fingers to engage correctly.It winds up being page d-3 in my cj2 service manual .Somebody should have it on their pc to share.
|
|
sudsie
Member Sponsor Member Joined: 20 July 2005 Location: , NJ Status: Offline Points: 385 |
Post Options
Thanks(0)
|
We checked the clutch fingers and they where ok, I think the clutch cable is to long, so i will try a shorter one. thanks for the reply.
|
|
Post Reply | Page <12 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |