Bought a car hauler today |
Post Reply | Page 123 5> |
Author | |
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
Posted: 02 June 2018 at 12:10am |
After a lot of searching, I bought a 7x16' tandem axle leonard flatbed to haul the jeep or model T. It has electric brakes on one axle. Its a good size to haul behind my F150 with small V8. I'll pick it up next week. I've ordered stake pocket tie down inserts, 3300lb axle straps and matching swivel hook ratchet straps. So it should be well secured.
I'm looking for advice and tips for loading and hauling the jeep. I know there should be 10-15% of the trailer weight on the tongue. But what's the best way to judge that? I'm thinking putting the jeep's bellhousing over the front axle may get me in the ballpark. Your thoughts? I intend to secure it by the axles at the spring plates and cross the straps to the opposit sides. Then maybe a strap straight forward and another straight back. So I'm looking for advice so I don't screw something up. It looks like this one. |
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
Joe DeYoung
Member Sponsor Member x 2 Joined: 20 July 2005 Location: Madison WI Status: Offline Points: 3362 |
Post Options
Thanks(0)
|
Congrats on a new trailer. When i hauled with a light truck, I wanted about 400 pounds of tongue weight which I measured in how much drop on the tail of the truck. For me it was about 2 inches.
|
|
Joe DeYoung
to many jeeps, parts, and accessories to list here, but apparently enough to keep me in trouble with my wife. |
|
48cj2a
Bantam Trailer Moderator Sponsor Member Joined: 22 July 2005 Location: Central, IL Status: Offline Points: 4523 |
Post Options
Thanks(0)
|
Looks nice!Might spring for the Anti-BMW protection before you pick it up.
|
|
Art C USAF (Retired)
47 CJ2A #134955 Project 48 CJ2A #206759 62 L6226 Station Wagon #58167 10900 45 T3-C #191 Project http://www.bantamt3c.com http://www.48cj2a.com |
|
nofender
Member Sponsor Member x 3 Joined: 10 May 2016 Location: Maryland Status: Offline Points: 2036 |
Post Options
Thanks(0)
|
Nice looking trailer.
Cross straps to the axle are a good plan. I've hauled I can't even count how many miles that way without issue. I'd say your center strap is overkill. But it also can't hurt anything. I typically start out by lining up the front of the rear tire with the leading edge of the trailer fender. This gets you in the ball park of weight distribution. Measure your tongue height before loading the Jeep, then after. Ideally you want the truck to look pretty level with weight on it. Take it for a ride and see how it feels. Adjust the jeep's position accordingly. Once you find that sweet spot, mark the trailer. I screwed a wood chock to the deck once I was happy with the position. Then after that, a blind man could position the weight well. Good luck!
|
|
46 CJ2a rockcrawler
46 CJ2a - 26819 46 Bantam T3c "4366" 47 Bantam T3C - 11800 68-ish CJ5 |
|
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
Thanks guys. I will do some short test runs to find the sweet spot. I'm looking forward to being able to take it out to the mountains, trails and gatherings.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
eestes1
Member Sponsor Member x 2 Joined: 12 Feb. 2011 Location: Mineral, VA Status: Offline Points: 1158 |
Post Options
Thanks(0)
|
We just bought the 12 foot version of that trailer, probably from the same place. Love it so far. My son has it right now, along with two of my other toys! Sorry for the poor picture quality. |
|
Rick Estes
|
|
Spinnas
Member Joined: 24 Apr. 2018 Location: AZ Status: Offline Points: 375 |
Post Options
Thanks(0)
|
Load it and make your truck squat 1-2” and you should be fine. Regardless of age I always suggest carry a spare loaded idler hub with spindle nut, washer, cotter pin and cap. Along with a shackle set, equalizer, leaf spring, 2 hanger bolts, and a u-bolt set with a u-bolt plate. All are easily replaced and can ruin a trip in a hurry.
|
|
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
Brought the new jeep hauler home today. Now to get it set up. I got the tongue storage box mounted. I got them to throw in a new spare tire for free, but I need to figure out where to mount it. There are 4 stake pockets and I got the stake pocket anchor point inserts for them. Got the axle straps and good, heavy ratchet straps with snap hooks on the ends. I think it will do well to carry the jeep or the Ford model T.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
64CJ5
Member Sponsor Member Joined: 15 Nov. 2013 Location: NE Wyoming Status: Offline Points: 946 |
Post Options
Thanks(0)
|
After several years I put brakes on the front axle. It made a noticeable difference in stopping distance. Now would be the time to have them put on if you are not up to doing it your self.
|
|
64CJ5 "Eeyore"
01TJ "Tigger" 52 M38 Severely demilitarized, "Popeye" The Coast Guard Jeep. 14 JK "Jake" To Trust Government Defys Both History and Reason. PUBLIC LAND Owner/User |
|
TERRY
Member Sponsor Member Joined: 22 May 2007 Location: BOULDER COLORADO Status: Offline Points: 3401 |
Post Options
Thanks(0)
|
[QUOTE=64CJ5]After several years I put brakes on the front axle. It made a noticeable difference in stopping distance. Now would be the time to have them put on if you are not up to doing it your self.
[/QUOTE In Colorado brakes are required on all axles.
|
|
BOULDER 48 2A
|
|
Nothing Special
Member Joined: 02 Feb. 2018 Location: Roseville, MN Status: Offline Points: 845 |
Post Options
Thanks(0)
|
For what it's worth, in Minnesota trailers over 3000 lbs (or that weigh more than the tow vehicle) are required to have brakes that are "adequate to stop and hold the trailer whenever it becomes detached from the towing vehicle." Minnesota at least doesn't require brakes on all axles (but I know other states do, so it's something I personally would make sure my trailers had).
|
|
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
This one has brakes on the rear axle and a breakaway system that is required by Virginia. If the trailer becomes detached, the brakes automatically apply on the trailer.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
windyhill
Member Joined: 14 Mar. 2009 Location: North East PA Status: Offline Points: 1395 |
Post Options
Thanks(0)
|
Nice trailer, you won't know what you did without it in no time! Get yourself some 4 good axle straps and tie down straps. I've used these from summit racing for years, they are a great price and excellent quality! Ratchet straps: Axle straps: Or a nice kit with a bag: I'd get at least 4 Heavy D rings welded on. Two front and two rear, Around 4' apart ( set your jeep on there and line them up with the inside of the drums). Axle straps around front and rear axle, easy hook, ratchet down and go. (note" on rear Jeep axle go around the very end where the brake lines are out of the way) don't forget to tie back your extra tail from the strap. I've hauled Jeeps etc. like this for many years and thousands of miles. Keep your Straps dry and out of the sun when not used and they last for a very long time.
Edited by windyhill - 08 June 2018 at 5:08pm |
|
'48 CJ2A
'53 CJ3B '59 CJ6 '65 CJ5 '67 CJ5 |
|
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
I finally have the trailer ready to go. Spare tire mounted, wood treated with Thompsons, storage box on tongue and tie downs installed. Between being out of town, and the endless rain, its been hard to get things done. But today I finished the tie down D-rings. Installed with grade 8 carriage bolts and welded in place. I'm thinking of adding a worm gear winch, hand crank style, but easily adapted to be powered by a cordless drill. But still thinking about the best way to mount it.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
slipinkramer
Member Joined: 21 June 2018 Location: Exeter, Califor Status: Offline Points: 20 |
Post Options
Thanks(0)
|
Nice, I'm seriously envious.
I flat tow my Willys with a towbar since I posses neither the trailer nor the truck necessary to do it the better way. I just completed 2,000 miles of flat towing last week with the Willys behind my Jeep Liberty. The high winds in Arizona were not a lot of fun. Tail waggin' the dog is what comes to mind thinking back on it. It made for a long day on I-40. |
|
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
I imagine that was a bit tricky! I've been playing with old cars, trucks and motorcycles for over 40 years, but never had a car trailer. I finally decided it was time to get one. Now I'm getting it set up how I want it.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
slipinkramer
Member Joined: 21 June 2018 Location: Exeter, Califor Status: Offline Points: 20 |
Post Options
Thanks(0)
|
I should really do the same.
I live in an agricultural area and trailers for hauling farm equipment are commonly available both new and used. I do have a 1990 Ford Bronco with the bigger 5.8L engine that could do the towing. Now you've got me thinkin... |
|
ndnchf
Member Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
Post Options
Thanks(0)
|
It sure saves a lot of wear and tear. Its also handy if a breakdown occurs. I have a 1924 Ford also, so I can haul that too. I use a 2007 F150.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
Post Reply | Page 123 5> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |