Ford Crewcab |
Post Reply | Page 12> |
Author | |
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
Posted: 30 Jan. 2018 at 2:25am |
My Ford F-350 crewcab 4x4.
Specs. 1977 crewcab shortbed 4x4. 1979 front clip and box. A/C 1989 5.9 Cummins non intercooled. Dodge auto with O-D. 205 t-case. Dana 60 front Dana 70 rear. Rear air bags with compressor. 1974 Ford 2wd power steering box. After market seat with center console. After market power windows,locks and cruise control. Edited by Flatfender Ben - 30 Jan. 2018 at 2:46am |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
Thanks for looking.
I will post pictures of interior and engine compartment soon.
|
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
berettajeep
Member Sponsor Member Joined: 03 Feb. 2009 Location: Astoria OR Status: Offline Points: 4304 |
Post Options
Thanks(0)
|
Great looking truck Ben. Did you do all the modifications?
|
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
The guy I bought it from had put the Cummins in it back in the 90s.
But when I found it the eng wasn’t in it and it was completely worn out,and painted yellow! I basically rebuilt everything and a friend painted it for me.
|
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
berettajeep
Member Sponsor Member Joined: 03 Feb. 2009 Location: Astoria OR Status: Offline Points: 4304 |
Post Options
Thanks(0)
|
Yellow? No offense to those who appreciate yellow.
Lets see those before pictures! |
|
Gil
Member Joined: 29 July 2016 Location: N.B.Canada. Status: Offline Points: 975 |
Post Options
Thanks(0)
|
Nice looking truck,well done
|
|
1946 cj2a 59108
1998 Jeep Cherokee 2 doors 2016 Jeep Cherokee TrailHawk |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
Not the greatest pictures.
|
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
[QUOTE=berettajeep]Yellow? No offense to those who appreciate yellow
Ya no offense it’s a fine color, as long as it’s not on my vehicle Plus every time I drove past the school Kids kept climbing in!!!!! Edited by Flatfender Ben - 31 Jan. 2018 at 2:36am |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
otto
Member Joined: 26 Feb. 2012 Location: Orygun Status: Online Points: 2241 |
Post Options
Thanks(0)
|
I painted one of my cars bright yellow once, it attracted a lot of bees.
|
|
47 CJ2A w/fuel injected boat engine
48 CJ2A 64 Ford Econoline Travelwagon If you can't get there in a Jeep, get a motorcycle! |
|
Bob3b
Member Joined: 08 Mar. 2010 Location: Akron, Ohio Status: Offline Points: 3095 |
Post Options
Thanks(0)
|
Me friend had a '66 four door her just sold...it was begging have a Cummiins in it.
|
|
1946 CJ2A #23881
1953 CJ3b, nice! 1949 Jeepster 1947 Empire Model 90 1985 CJ10A Spen "S" Utility trailer Kubota l3400 |
|
Greaser007
Member Joined: 16 Jan. 2018 Location: Anderson, Calif Status: Offline Points: 850 |
Post Options
Thanks(0)
|
Ben,
Ok, here is a "peek" of my '77 F-350 Ford Crew-Cab. I completed the 2-year-build in 1998. The cab came off of an F-250 2wd rust-free northeastern-California arid-climate. I put the F-250 cab onto a '77 F-350 Longbed 2wd Chassis, and then sourced a 2wd Longbed box with the race-track trim and made mounts to ulitize original bed-holes. The rivets for the front 2wd suspension got torched out, and assembly removed for installation of '76 F-250 springs and hangers. ( the 2wd frames are factory-punched to accept the '76 leaf-spring Crossmember ! ) That means the spring front member is a Bolt-On. Anyway, I sprayed it with 3-full coats of PPG Acrylic in original blue. I have bunches of photos of my steering ('93 Ford Corp 2wd PS box ), and how I reconfigured the 2wd crossmembers to accommodate the 300-inline six engine, with NP435 trans, and married NP205 T-Case. I has a split-driveline in rear of course. Front diff is sourced from a '79 F-350 D-60 Disc brake. I sold a '66 rust-free 4-door Ford cab 2-years ago that I had owned 25-years and just couldn't get after it. :-( The Rubicon jeep trail was calling each summer, and the '66 project never made it to fruition. I like the early Ford Crewcab pickups ! So, Ben, from what you have learned, what year (s) of Cummins are desirable ? Your pickup is Sweet ! ...... hard to believe I've ran mine for 20-years. |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
Hey Len
I remember seeing pictures of your crewcab and steering conversion, on oldfordcrewcabs forum!! You have an awesome pickup! I haven’t been active on the crewcab forum for a few years. For Cummins conversions the early 89-93 engines are my favorite. They have easy injector pump mods. No computer If I did another one I’d go to the work of having an intercooler. To fit an intercooler with a/c condenser and trans cooler is do able but a lot more fabrication. As with any build it all depends on what your going to use the pickup for. An over-drive transmission is a must with a low rpm engine like a Cummins. And unless all you do is pull heavy loads your going to want more than 4:10 gears. No OD 4:10 gears =about 60-65 mph top speed against the governor. With stock gov spring and tires. To do another one my dream build would be 73-79 crewcab short box, on a late model super duty frame and axels, early Cummins with inter cooler, and an overdrive tranny with more than four gears. |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
A while back...
After noticing a vibration coming from the drive train that became worse as l pulled my trailer down the hwy, I started looking for a place to pullover, as I slowed to a stop the vibration was so bad I thought the rear drive shaft must have come loose!! I got out and looking couldn’t see anything wrong But as soon as I began moving again I could tell something Bad was wrong I ended up leaving my trailer at the dairy where I got my bulldog jeep. My Dad came with his trailer and hauled my crewcab for me. I was hoping a wheel bearing had went out... that would have been nice.. This is what I found Edited by Flatfender Ben - 18 Feb. 2018 at 8:29pm |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
I had a diesel shop do the rear end rebuild.
All the gears where ruined not only that but the carrier bearing had spun on the carrier ruining it! And spun the carrier race in the diff housing almost destroying it! Pinion bearing race spun in housing! Luckily they where able to repair the differential housing. So $$$$ All new bearings. New ring and pinion. New carrier. Who ever set this diff up originally didn’t know what they where doing!!!! My rebuilder guy said nothing was set up correctly. He said he’d never seen a spicer pinion gear fail like that, it’s always the ring gear. One plus is with the new spicer gear set I also had them install a Spicer trak lok limited slip differential. |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
As you May have seen in my wagoneering thread I pulled my gutter trailer with the Wagoneer but instantly realized that was not a good idea as the trailer is too much for the Wagoneer.
My dad loaned me his 94 Dodge to pull my trailer with for two weeks while the crew cab was in the shop. What I didn’t realize is after the rear end was back together on the crew cab they said I couldn’t pull my trailer for 600 miles as there’s a break in period On the differential gears!!! Which is a bummer because I’m busy with work and without being able to pull my trailer there’s no reason to be driving my pick up so 600 miles going to be a while. So I ended up spending a weekend working on my 74 highboy Ford so I could use it to pull my trailer. Replaced a Leaking rear wheel cylinder and brake shoes. New radiator and heater hoses. Oh ya and new starter. Sometimes I feel like all I do is work on junk. Edited by Flatfender Ben - 18 Feb. 2018 at 9:25pm |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
SE Kansas 46 CJ-2A
Member Sponsor Member x 3 Joined: 22 Jan. 2016 Location: S.E. Kansas Status: Online Points: 3183 |
Post Options
Thanks(0)
|
While there is a break in on the Dana Trac-Lok, the instructions I gave my customers was to go to a parking lot that was empty and do about three dozen wide figure eights on the pavement. Voila! You are broke in...
I installed dozens of Trac-Loks in the 18 years I owned my shop and never heard of a 600 mile break in, but I have heard of the figure eight break in discussed by a Dana-Spicer engineering rep. |
|
46 CJ-2A #64462 "Ol' Red" (bought April 1969)(second owner)(12 V, 11" brakes, M-38 frame, MD Juan tub)
U.S. Coast Guard Chief Petty Officer(ret.) U.S. Army Vietnam veteran and damned proud of it. |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
While the crewcab was at the diesel shop I had them install my new hybrid turbo
It’s upgraded from a 50 to a 60 compressor wheel. Which should help with egts as it will push a lot more air. Oh if you don’t like the sound of turbo whistle this upgrade ain’t for you! It sounds like a 747 at take off when it’s spooling up Okay A little exaggeration!! |
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Flatfender Ben
Member Joined: 13 July 2014 Location: Nyssa OR Status: Offline Points: 2657 |
Post Options
Thanks(0)
|
Thanks very much for this information. I’ve put about 300 miles on it. If it’s still a good idea I will definitely do the figure eights?? I thought 600 miles sounded like a lot, but they said they wanted to inspect the gear pattern after 600 miles and if I didn’t follow these instructions it would void there warranty on the install.
|
|
1946 cj2a desert dog
1946 cj2a bulldog 1948 cj2a blue jeep 1953 cj3b yard dog 1955 willys wagon 1955 willys pickup 1956 willys pickup boomer 1960 fc 170 1968 jeepster commando 1990 Grand wagoneer |
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |