Just saved a pair of 2a's |
Post Reply | Page 12> |
Author | ||
2a_toys
Member Joined: 21 July 2009 Location: Wichita, KS Status: Offline Points: 8 |
Post Options
Thanks(0)
Posted: 21 July 2009 at 7:38pm |
|
New to the site because I just got my first jeeps (yes...plural). Moral of the story...don't expect to haul a half empty trailer on a road trip without filling it!
Story on my 47 CJ2a number 1...Hauled the motorcycles to Colorado a few weeks ago for a bike trip on the big trailer for ease of loading/unloading. A friends family member had an "old jeep" for sale so I stopped to look at it and it somehow ended up on the trailer? It is below. This one is all there and completely stock. VERY RUSTY though. This one is going to be my wifes toy and restored to as close to stock as possible to be used for some trail fun.
2a number 2...This one fell into my lap from Craigslist on a random search for "Willys". It is a 2a body tub, a Military frame (whatever that means) and nothing else. I also happened to find a 69 IH Scout 800a complete with axles, transfer case and trans. Basically got this "stuff" for hauling it off! Going to make a 4.3 powered go anywhere toy out of it. Usually I'd feel obligated to make it as stock as possible, but these parts were bound for the scrapper so I don't feel bad. Just another way of saving a 2a and making it a VERY fun toy at the same time.
Anyway...long story but as you can see I'll need some help along the way. I'm starting with the stock one. I have some 4-wheelin friends with Jeeps, but none of them are remotely close to stock. Can't wait to get the little Go-Devil running!
Thanks for reading...comments and advice is definetly appreciated.
|
||
bkreutz
Member Sponsor Member Joined: 17 Oct. 2006 Location: Fruitland Idaho Status: Offline Points: 7037 |
Post Options
Thanks(0)
|
|
Welcome to the group, looks like you've jumped in with both feet (and fully clothed) Lots of good people and advice here, (after you get used to the "personalities", some of us have more "personality" than others.) I think you've got a couple of good starts, the first one looks pretty good for a restoration, better than a lot of us have started with, I can't see any holes in the sides of the tub (but the bottom probably has them), and you've got a pair of original seat frames, from what I can see, the rust is just on the surface, nice find. Again, welcome.
|
||
2a_toys
Member Joined: 21 July 2009 Location: Wichita, KS Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
Thanks for the welcome! Yes...definitly jumped in with both feet. There are actually some holes in the side...knocked the bondo out of them last night . also some very poorly welded in panels on the side and back of the tub. Floors have been replaced..sorta, someone just laid sheet metal over the old ones then welded them in. They have rusted through too.
Oh...I assume someone is keeping track of the ones still alive. Here are my numbers:
Complete 47 CJ2a - 146122
Other CJ2a (don't know year) - 185794
Is there anyway to find out what year based on the serial number?
|
||
F Bill
Member Sponsor Member x 2 Joined: 05 Dec. 2005 Location: central Texas Status: Offline Points: 7752 |
Post Options
Thanks(0)
|
|
http://www.thecj2apage.com/history.html
If you click on the jeep in the top left of your screen it takes ya to the home page, Vehicle history is wheer you want to look up your serial number...Thanks to Harold West!
|
||
If you haven't checked out the tech FAQ section, go to:
http://www.thecj2apage.com/forums/tech-faq_forum57.html for a lot of great stuff you need to know!! |
||
Bob W
Member Sponsor Member x 4 Joined: 08 Aug. 2005 Location: Monticello, NY Status: Offline Points: 1691 |
Post Options
Thanks(0)
|
|
Looks like it's a 1948. Do you have any more photos of the body tub? Is there a Body serial number plate below the vehicle serial number plate on the firewall? Which side was the spare tire carrier on? How about the top bow holder brackets? Thanks!! |
||
berettajeep
Member Sponsor Member Joined: 03 Feb. 2009 Location: Astoria OR Status: Offline Points: 4304 |
Post Options
Thanks(0)
|
|
Welcome to board!
|
||
ralf
Member Sponsor Member x 2 Joined: 06 May 2008 Location: Fayetteville WV Status: Offline Points: 4861 |
Post Options
Thanks(0)
|
|
The devil is in the details.
|
||
1947 CJ2A
1948 CJ2A 1953 Ford NAA Golden Jubilee Tractor 1941 J-3 Cub 1957 Farmall Cub Low Boy tractor 1942 Clarktor WW2 tug |
||
Joe DeYoung
Member Sponsor Member x 2 Joined: 20 July 2005 Location: Madison WI Status: Offline Points: 3362 |
Post Options
Thanks(0)
|
|
Welcome. Congrats on your aquistions. You'll find an incredible knowledge base from the members to help guide you through your jeep questions that you'll undoubtably run accross. You'll also find an excellent search function to look up past posts on various subjects that have been discussed. It's a great tool to find quick answers to common questions. If you haven't already done so, I would invest in a maintance manual, service manual, and a parts manual. These three books will save you alot of headaches trying to figure out your new 4 wheeled friend. Lastly, there are alot people here with tons of extra parts. A lot of the members have parted out jeeps and don't throw anything away... no matter how insignificant. Some members have reproduced parts and some have NOS parts on the shelf. If your looking for something that you don't see for sale, just ask. Somebody is bound to have it. Good luck with your project and have fun with it both while your working on it and after it's done.
|
||
Joe DeYoung
to many jeeps, parts, and accessories to list here, but apparently enough to keep me in trouble with my wife. |
||
2a_toys
Member Joined: 21 July 2009 Location: Wichita, KS Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
1948 is what I thought. The plate with the 185794 is the only plate I remember seeing on the firewall but will look agian. It doesn't have a spare tire carrier that I can see. As for the bow holders, I only noticed the ones beside the seat backs. I did notice it has a tool box in the back that has "Jeep" stamped into it. Is that a factory option or did someone add that later? I have a bunch of pictures of the tub on a different computer, I think I have a picture of the tool box as well. I'll post them tonight.
Thanks,
Nick
|
||
sireland67
Member Joined: 27 Feb. 2009 Location: Nutter Fort WV Status: Offline Points: 989 |
Post Options
Thanks(0)
|
|
The jeeps look like a great start, much more there than I had to start with. After I tore mine down the only parts that were salvagable was the motor, tranny, transfer, front and rear axles and steering box, all of which needed rebuilt. My frame and body was beyond repair. Shawn |
||
1948 CJ-2A
2003 TJ |
||
Bob W
Member Sponsor Member x 4 Joined: 08 Aug. 2005 Location: Monticello, NY Status: Offline Points: 1691 |
Post Options
Thanks(0)
|
|
There should be a bracket inside the rear wheel well on the side where the spare tire was located. The opposite side will not have the large reinforcement with the round hole in the center.
|
||
2a_toys
Member Joined: 21 July 2009 Location: Wichita, KS Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
Ahh...wondered what that was for. On the 47 it is on the passanger side. The 48 I'm not sure. I'll have to look tonight.
Also, can you tell me what is so special about the military frame vs. cj frame? The guy I got it from seemed to think the military frame was better. Would that mean it was an older frame too? Say early 40s? I assume the 48 body will fit on it but haven't tried.
|
||
Bob W
Member Sponsor Member x 4 Joined: 08 Aug. 2005 Location: Monticello, NY Status: Offline Points: 1691 |
Post Options
Thanks(0)
|
|
Do you have a photo of the frame? Sounds like it could be an MB or M-38 frame. The MB frame has a round "machine gun" bracket on it. The M-38 frame is considered to be stronger by many people. A CJ-2A body can be put on either frame but it's probably easier on the M-38 frame. |
||
2a_toys
Member Joined: 21 July 2009 Location: Wichita, KS Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
Well...I finally got the frame and body of the 48 in my shop. Thought I would post an update. The 47 is in storage for now until I get the 48 done. The 48 is going to be the V8 toy and i've got to get it ready for the trails next spring.
So it turns out I have an MB frame based on Bob W above. I assume the picture below is one of the machine gun mount.
Trailer hitch...looks original?
The beginning pile of parts
The 48 body and MB frame are going to have a 305 Chevy V8, TH350 automatic trans, Dana 20 Transfer Case, Dana 44 rear from a 69 Scout and a Dana 30 front from a 79 CJ. I have spent a grand total of $350 so far on this one. My goal is to see how little I can spend and still have a great go anywhere jeep. I started boxing the frame this weekend. Got all the plates made, as soon as it gets back from the sand blaster I'll start welding them in and then hang axles.
|
||
1947 CJ2a 146122
1948 CJ2a 185794 |
||
russnj
Admin Webmaster Joined: 20 July 2005 Location: W. Windsor, NJ Status: Offline Points: 3943 |
Post Options
Thanks(0)
|
|
Looks like a M38 frame. Bob W will know for sure.
Russ |
||
43 MB, 48 CJ2A, 50 CJ3A, 55 M38A1, 56 CJ5, 79 M151A2, M100 ,65 M416 |
||
Bob W
Member Sponsor Member x 4 Joined: 08 Aug. 2005 Location: Monticello, NY Status: Offline Points: 1691 |
Post Options
Thanks(0)
|
|
It's not an M-38 frame. I am going to say it is probably M-38A1.
|
||
ndrtkr
Member Sponsor Member Joined: 18 Mar. 2009 Location: Mississippi Status: Offline Points: 884 |
Post Options
Thanks(0)
|
|
Bob M...Does the M38A1 have the boxed channel type front cross member like a GPW?
Just curious, as I don't know much about M-38A1's. Looks a little heavier than a GPW.
|
||
2a_toys
Member Joined: 21 July 2009 Location: Wichita, KS Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
If it helps, this one is boxed all the way from the front to just in front of the clutch/brake attach. What year is a M38A1? curious.
This picture shows the passanger side. The cardboard is my template for boxing the rest of the frame.
|
||
1947 CJ2a 146122
1948 CJ2a 185794 |
||
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |