axle ratio |
Post Reply | Page <12 |
Author | |
jpet
Moderator Group Sponsor Member x 5 Joined: 30 Apr. 2008 Location: Ramsey, IL Status: Offline Points: 11174 |
Post Options
Thanks(0)
|
It's actually 5-3/8 revolution. Your ratio is 5.38:1
|
|
CJ2A #29110 "General Willys"
MB #204827 "BAM BAM" "We do what we can, and we try what we can't" |
|
dodjh
Member Joined: 18 July 2012 Location: ms Status: Offline Points: 1325 |
Post Options
Thanks(0)
|
That is what I was hoping it was...Thank you.
|
|
"COURAGE IS BEING SCARED TO DEATH
-BUT SADDLING UP ANYWAY" JOHN WAYNE |
|
pipeout
Member Joined: 22 Sep. 2015 Location: Argentina Status: Offline Points: 8 |
Post Options
Thanks(0)
|
Hi! Anyone knows if it's posible to change the 5.38 ratio for a longer one? It almost imposible to find a different pinion and ring for the CJ2A dana 30 / 41 right ?? I'm writing from Argentina sory for my English!! The forum is excelent!!
|
|
dodjh
Member Joined: 18 July 2012 Location: ms Status: Offline Points: 1325 |
Post Options
Thanks(0)
|
Someone else might chime in but the front is either a D25 or D27 and the back is a D41.
|
|
"COURAGE IS BEING SCARED TO DEATH
-BUT SADDLING UP ANYWAY" JOHN WAYNE |
|
pipeout
Member Joined: 22 Sep. 2015 Location: Argentina Status: Offline Points: 8 |
Post Options
Thanks(0)
|
Yes your right! I read dana 30 and write that but i have front dana 25 rear 41 ...any information for longer ratios? |
|
Mark W.
Member Sponsor Member Joined: 09 Nov. 2014 Location: Silverton, OR Status: Offline Points: 7986 |
Post Options
Thanks(0)
|
Finding any new gear sets for Dana 41 is near impossible. Finding one other then 5.38 is impossible. While a few ford pickups used the Dana 41 and they did use a couple of other ratios. Those have been long ago used up.
Your best option for taller gears is to use an Overdrive or switch to a Dana 44 axle.
|
|
Chug A Lug
1948 2A Body Customized 1949 3A W/S 1957 CJ5 Frame Modified Late 50's 134L 9.25"clutch T90A D18 (1.25") D44/30 flanged E-Locker D25 5.38 Since 1962 |
|
pipeout
Member Joined: 22 Sep. 2015 Location: Argentina Status: Offline Points: 8 |
Post Options
Thanks(0)
|
Thanks! I suppose that in order of what i had been reading about the dana 41. Also i read about the overdrives: one like this http://www.kaiserwillys.com/product/2650/willys-jeep-overdrive#image_overlay ?? thats a good amount of money hahaha
|
|
Richard J
Member Sponsor Member Joined: 09 Nov. 2012 Location: AZ. Status: Offline Points: 144 |
Post Options
Thanks(0)
|
try Herm the overdrive guy
|
|
Richard
|
|
jeeper50
Member Sponsor Member Joined: 01 Mar. 2008 Location: Spanish Fort AL Status: Offline Points: 2579 |
Post Options
Thanks(0)
|
FYI next time you have the pumpkin cover off on the ring gear is stamped number like 47/11, divide the 47 by 11 = 5.38. all ring gear are marked in this way
47 teeth on ring gear 11 teeth on the pinion gear
|
|
Belleview ol skool winch soon. '48 CJ2A 283 V8 sm 420 granny low, tera low D18, overdrive,lockers Texan at heart,Alabama by retirement |
|
dodjh
Member Joined: 18 July 2012 Location: ms Status: Offline Points: 1325 |
Post Options
Thanks(0)
|
How do you get 47/11 = 5.38...it should be 4.27. 43/8 = 5.38.
Edited by dodjh - 02 July 2016 at 5:13am |
|
"COURAGE IS BEING SCARED TO DEATH
-BUT SADDLING UP ANYWAY" JOHN WAYNE |
|
Post Reply | Page <12 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |