Spen Landing Leg |
Post Reply | Page 12> |
Author | |
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
Posted: 30 Dec. 2017 at 4:37pm |
13/16 from top of leg[top refer's to top when leg is down]to center of first hole down,which is 11/16 diameter.from rear of leg to center of first hole down is 7/8''. Second hole down from top is 1 7/8 from top to center of hole,it is 13/16 from rear straight edge.This hole is offset from the larger top & bottom hole.Bottom hole is 4 1/2'' from top to center of hole The two larger holes[top & bottom] are in alignment with each other,They are the same distance from front edge of stand.Center or second hole down is 9/16'' diameter!Hope this help's anyone with reproducting one of these !
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
Also the hole's in leg at top are 5/8,bolt fit's through the 2 larger hole's that are in line,the offset hole take's a 9/16,that size bolt fit's this smaller hole!
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
Hey Bob3b,have been trying to get these posted without success until now,had to et my son in law to post these on here for me,Sorry to be so late!Here are the measurements that I got on this leg, 2 inches wide at top to bottom in front.The 2 sides at top are 1 7/8'' to top of crown,what I mean by crown is there is a depression at top extending down to 11 1/4''.Look's like die machine depression from the rear towards front when leg is down!I am guessing this may have been for more strength maybe,I dont know! The two side's at bottom are 4'' long!Hope this help's! If you need more just give me a shout!
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
|
|
cj2a51-10
|
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
Ok Bob3b I will get some pic's and measurements tomorrow and get them posted!
|
|
cj2a51-10
|
|
Bob3b
Member Joined: 08 Mar. 2010 Location: Akron, Ohio Status: Offline Points: 3095 |
Post Options
Thanks(0)
|
I’d love pics and measurements!
|
|
1946 CJ2A #23881
1953 CJ3b, nice! 1949 Jeepster 1947 Empire Model 90 1985 CJ10A Spen "S" Utility trailer Kubota l3400 |
|
jeepnut48
Member Joined: 12 July 2010 Location: Kentucky Status: Offline Points: 98 |
Post Options
Thanks(0)
|
Hey Bob3b and anyone else on here that need pic's of original Spen landing leg,I have one that goe's on my spen!It is off right now,rusty but still good condition,have not been on here in a while,was going to get a picture and try to post it on here last year but got busy and forgot!Anyway got one if pics are needed!
|
|
cj2a51-10
|
|
Dave Pete
Member Joined: 07 Sep. 2008 Location: USA Status: Offline Points: 141 |
Post Options
Thanks(0)
|
That is funny. Same pattern as the trailer I'm working, 1964 Roadrunner 15' camp trailer. Found a spare wheel too in the salvage yard.
|
|
Bob3b
Member Joined: 08 Mar. 2010 Location: Akron, Ohio Status: Offline Points: 3095 |
Post Options
Thanks(0)
|
I put the old "seals" back on and they really seem fine. My Spen has a 5 on 4.25 bolt pattern...found a tire and rim for spare at a yard sale today.
|
|
1946 CJ2A #23881
1953 CJ3b, nice! 1949 Jeepster 1947 Empire Model 90 1985 CJ10A Spen "S" Utility trailer Kubota l3400 |
|
Dave Pete
Member Joined: 07 Sep. 2008 Location: USA Status: Offline Points: 141 |
Post Options
Thanks(0)
|
And PM me if you need me to locate some "on my PC" photos to email you. I took detailed photos.
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |