First timer! |
Post Reply | Page <1 345 |
Author | |
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Back at it again, the cold weather forced me back in the garage. Mounted
the tail gate a few weeks ago and got new hood blocks this last
weekend. Working on the finishing up the gear shift next. Unfortunately,
the passenger seat frame I found turns out to be to big. Not sure if
its off a 3a or b? |
|
Ol' Unreliable
Member Joined: 25 Sep. 2016 Location: CO Springs CO Status: Offline Points: 4226 |
Post Options
Thanks(0)
|
Your windshield frame is from an M-38, maybe that seat frame is too. Note how the front cross tube on your driver's seat frame is welded on top of the two front-to-back tubes. That's what your passenger's seat frame should look like too. I have an M-38 passenger's seat frame in Ol' Unreliable and have been hoping to find a 2A frame. No luck yet... BTW, your Jeep looks great!
|
|
There's a reason it's called Ol' Unreliable
|
|
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(1)
|
Thanks! its coming along great. I need to finish up the gauges and do some (a lot) of adjustments.
|
|
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Finally made it though the winter. I finished my gauges, went with a VDO set. i wanted something that fit with the back bezel and face of the originals. I ordered a new fuel gauge because I wasn't sure a VDO would work with the sending unit. Also got the high beam indicator in. |
|
Greaser007
Member Joined: 16 Jan. 2018 Location: Anderson, Calif Status: Offline Points: 850 |
Post Options
Thanks(0)
|
Russel,
Your willys is sure Sweet. When the body looks so nice, they are worth washing up and keeping clean so they show the luster. How is the steering after the bellcrank rebuild ? ( I resoldered my fuel tank bung yesterday with no-explosions ) ! amazing. It will be years before my little '46 will get a Dupont overhaul. Those new gauges look buff against the orange tangerine. Nice work, and it was a pleasure to look back through this thread. Len |
|
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Got the 12 volt wipers installed. |
|
srlbotanical
Member Joined: 03 July 2017 Location: Saranac MI Status: Offline Points: 395 |
Post Options
Thanks(0)
|
That is one good looking Jeep!
|
|
Steve
1948 CJ2A - The Good Dog 1997 TJ - The Trail Rig 2001 XJ - The kids ride |
|
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Probably jumped the gun a bit but the weather was nice. First time out of the drive way since I got it. |
|
Ol' Unreliable
Member Joined: 25 Sep. 2016 Location: CO Springs CO Status: Offline Points: 4226 |
Post Options
Thanks(0)
|
We'll have to presume that you made it back safely.
|
|
There's a reason it's called Ol' Unreliable
|
|
Greaser007
Member Joined: 16 Jan. 2018 Location: Anderson, Calif Status: Offline Points: 850 |
Post Options
Thanks(0)
|
Very exciting day for you. Congrats on the "drive" !!
It is a treat to have a street-legal billy-goat. In the "end" if there is one, we probably invest the same amount that it would cost to replace with a nice side-by-side. are they a UTV, ours are WILLYS. |
|
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Made a little more progress. Got the chrome headlight rings installed. Working on the crossover tube to put a 'correct air cleaner. Finally broke down and ordered a passenger seat frame. Got the seat installed. You can just see the rip in the top of the drivers seat. I ordered a new one from Beachwood Canvas, hope to get is on this weekend. Finally outside. I will do the wheels next. I found some CJ5 rims, these stick out a little far for my taste. Edited by 48CJ2 - 13 July 2019 at 5:03am |
|
dsc
Member Joined: 24 Oct. 2014 Location: India Status: Offline Points: 519 |
Post Options
Thanks(0)
|
That looks beautiful.48 cj2, just looking back at your posts realised you had a Koenig hard top.
I have searching hard for details on the doors of the hard top. Do you still have it around that you can help me. Regards. Dsc
|
|
48CJ2
Member Joined: 26 Dec. 2015 Location: Vancouver WA Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Here is some general info: Unfortunately I no longer have that top.
|
|
Post Reply | Page <1 345 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |