Worn Distributor Weights |
Post Reply |
Author | ||||
Tom Lach
Member Joined: 30 Aug. 2010 Location: Downers Grove,I Status: Offline Points: 40 |
Post Options
Thanks(0)
Posted: 17 Mar. 2019 at 2:30pm |
|||
Kurt re-built a very rough distributor for my GPW three years ago. It came back looking brand new and has performed flawlessly.
|
||||
T3C - 21351
1942 Script GPW |
||||
unclemoak
Member Joined: 06 Oct. 2018 Location: Englewood, CO Status: Offline Points: 352 |
Post Options
Thanks(0)
|
|||
Additionally, if you have an IAD 4008 and don’t mind waiting a while, you can source rebuild kits out of the Netherlands.
|
||||
unclemoak
Member Joined: 06 Oct. 2018 Location: Englewood, CO Status: Offline Points: 352 |
Post Options
Thanks(0)
|
|||
Oops! To the OP, both the weights and can plate are available on eBay. Weights- https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F181095376785 Cam plate - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F183692186678 |
||||
smfulle
Member Sponsor Member Joined: 16 Sep. 2010 Location: Ogden, Utah Status: Offline Points: 6142 |
Post Options
Thanks(0)
|
|||
The dizzy in the picture is not my distributor. It belongs to the original poster of t his thread. Kurt did a wonderful job on mine and it is running great.
|
||||
jonholifield
Member Joined: 21 Mar. 2015 Location: Warner Robins, Status: Offline Points: 40 |
Post Options
Thanks(0)
|
|||
The distro at the top of this post has not been rebuilt.
|
||||
-Jonathan Holifield
1946 CJ2a |
||||
unclemoak
Member Joined: 06 Oct. 2018 Location: Englewood, CO Status: Offline Points: 352 |
Post Options
Thanks(0)
|
|||
I thought I read that in your build thread. If he just rebuilt it, how was this missed? Or is it not part of a standard rebuild?
|
||||
smfulle
Member Sponsor Member Joined: 16 Sep. 2010 Location: Ogden, Utah Status: Offline Points: 6142 |
Post Options
Thanks(0)
|
|||
He did mine in December.
|
||||
chasendeer
Member Joined: 24 Feb. 2012 Location: Napa,CA Status: Offline Points: 1088 |
Post Options
Thanks(0)
|
|||
Has anyone had there distributor done by Kurt recently?
|
||||
Oldpappy
Member Joined: 09 Apr. 2018 Location: Tennessee Status: Offline Points: 4917 |
Post Options
Thanks(0)
|
|||
It is a good maintenance practice to regularly lubricate the pivots, and check the springs on the mechanical advance, but very few people do this until they notice issues due to parts wearing out, then it is beyond maintenance. An example of "Out of sight, out of mind" at work here.
With that much wear, I too think the whole thing should be taken apart for inspection and rebuild. It is older than I am, and I need a rebuild.
|
||||
jonholifield
Member Joined: 21 Mar. 2015 Location: Warner Robins, Status: Offline Points: 40 |
Post Options
Thanks(0)
|
|||
Cool! I had no idea someone restored these. Thank you
|
||||
-Jonathan Holifield
1946 CJ2a |
||||
Mike F
Member Joined: 12 Aug. 2018 Location: Longview wa Status: Offline Points: 684 |
Post Options
Thanks(0)
|
|||
Kurt will also sell you the parts if you so desire. I think if I had that one I’d have him do it
|
||||
smfulle
Member Sponsor Member Joined: 16 Sep. 2010 Location: Ogden, Utah Status: Offline Points: 6142 |
Post Options
Thanks(0)
|
|||
Send it to Willys Dustributirs. He’ll fix you up like factory new.
|
||||
jonholifield
Member Joined: 21 Mar. 2015 Location: Warner Robins, Status: Offline Points: 40 |
Post Options
Thanks(0)
|
|||
Well, looks like both the weights and the slotted part are available on ebay. Maybe I will try a rebuild.
|
||||
-Jonathan Holifield
1946 CJ2a |
||||
jonholifield
Member Joined: 21 Mar. 2015 Location: Warner Robins, Status: Offline Points: 40 |
Post Options
Thanks(0)
|
|||
So I was hunting down why I was lacking power while going down the road. I finally took the distributor plate out and found that the timing weights were pretty much just flopping around in there. The pegs have worn into the slots and the body side pegs have wallowed out enough that the weight on the left was almost free. I'm assuming rebuilding this would require some creative machining if even at all possible. Looks like I'm going to be buying a distro soon. : ( |
||||
-Jonathan Holifield
1946 CJ2a |
||||
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |