Limited Slip - Best for Tread Lightly? |
Post Reply |
Author | |
JeepFever
Member Sponsor Member Joined: 07 Aug. 2012 Location: VA Status: Offline Points: 2753 |
Post Options
Thanks(0)
Posted: 22 June 2022 at 11:39pm |
Nothing too exciting here, but some thoughts on "locker" type.
Today, Wilson was pulling a Bantam trailer-load of dirt in a somewhat awkward situation. The trailer had probably 800lbs of dirt, trailer tire pressure at 12 lbs, in soft dirt, so not an easy pull. Not sure how much force it was to pull, but somewhat high. Wilson was backed down a slight slope, and rear passenger is dropped over a 14" rounded dirt "step". This put it into a "crossed-up" situation of light down-pressure on passenger rear. I wanted to "tread lightly" and not spin tires, so was going to put in 4wd, but thought I would see what happened in 2wd. To my surprise, it pulled out with ZERO tire spin. My guess: If rear was open, then the passenger tire would have spun hopelessly, requiring 4wd If rear was selectable and locked, it would have made tire marks because of hard left turn that was necessary. If auto-locker, possibly driver tire would have spun until additional traction of passenger tire kicked in. ie. Limited slip might have been only locker type to leave no trace. . traction of passenger + 3x of that on driver was enough to pull out with no spin. Photo does not really show the slope, or the step too well, but this was not an easy pull. |
|
Oldpappy
Member Joined: 09 Apr. 2018 Location: Tennessee Status: Offline Points: 4921 |
Post Options
Thanks(0)
|
Are you questioning whether you have a limited slip?
Easy to find out, just put jack stands under both ends of the rear axle so both wheels are off the ground. Turn one wheel by hand and tell us what the other wheel does.
|
|
If you can't get there in a Jeep you don't need to be there!
|
|
Mark W.
Member Sponsor Member Joined: 09 Nov. 2014 Location: Silverton, OR Status: Offline Points: 7986 |
Post Options
Thanks(0)
|
if they turn opposite directions you have an Open rear if they turn the same direction you have a Limited slip, or some form of locker
|
|
Chug A Lug
1948 2A Body Customized 1949 3A W/S 1957 CJ5 Frame Modified Late 50's 134L 9.25"clutch T90A D18 (1.25") D44/30 flanged E-Locker D25 5.38 Since 1962 |
|
Jeff J
Member Joined: 12 Mar. 2018 Location: USA Status: Offline Points: 441 |
Post Options
Thanks(0)
|
Turning the trailer like that takes less effort than pulling it straight giving the jeep a head start on the full tow weight.
|
|
oldtime
Member Joined: 12 Sep. 2009 Location: Missouri Status: Online Points: 4186 |
Post Options
Thanks(0)
|
I like the limited slips more specifically the “Powr Loks” for several reasons.
I like them so much that every one of the last 12 axles I built had original Powr Loks installed.
They were specifically developed for Jeeps by Spicer for the US military, No they are not perfect and certainly are not the best choice for any particular type of driving. They excell at almost nothing except they are of the strongest most durable design and by for the most versatile for mixed driving conditions. Plus no engagement is required. It’s fully automatic so you need not consider when to engage and when not. Handles every type driving condition well but no specific condition with excellence. Ice, snow, liquid mud, paste mud, wet grass, loose rock, solid rock, slick rock and sand. Plus dry pavement cornering at speed. Edited by oldtime - 23 June 2022 at 9:38am |
|
Currently building my final F-134 powered 3B .
T98-A Rock Crawler using exclusive factory parts and Approved Special Equipment from the Willys Motors era (1953-1963) Zero aftermarket parts |
|
Stev
Member Sponsor Member Joined: 27 July 2016 Location: Cincinnati Status: Offline Points: 2391 |
Post Options
Thanks(0)
|
I have had okay results not leaving tracks in the woods, Silvopasture area, and fields with the CJ2A. Ground condition and moisture content are big factors. When it is very wet, it is difficult to leave not marks. Try not to go into the fields when they are wet.
I get the best results buy putting the Jeep in four wheel drive as soon as I leave the farm lane. Gear selection needs to match the task at hand (not too fast or slow). Select stopping locations that are high, solid and level. Edited by Stev - 23 June 2022 at 9:50am |
|
Stev
1946 CJ2A Trail Jeep (The Saint), 1948 CJ2A Lefty Restored |
|
Oldpappy
Member Joined: 09 Apr. 2018 Location: Tennessee Status: Offline Points: 4921 |
Post Options
Thanks(0)
|
My CJ5 has a Powr Lok in the rear and I am very impressed with it. That Jeep will go places in 2WD that requires 4WD in my CJ2A. I have a pair M38A1 Marine surplus axles that are going under the 2A the rear has the Powr Lok.
|
|
If you can't get there in a Jeep you don't need to be there!
|
|
GeorgiaFlattie
Member Sponsor Member Joined: 08 Feb. 2017 Location: Canton, GA Status: Offline Points: 124 |
Post Options
Thanks(0)
|
If you do a mix of road and trails or mainly mild trails a PowerLok is a great option. If you primarily do hard trails with minimal/no road miles there are better options. In fact, I'm getting ready to pull the D25 with a PowerLok out of my 3A then swap in a D30 with a lockrite. Having a tire up in the air spinning when the other should be pulling is annoying. My rear axle is welded so I'm a fan of maximum traction at all times.
|
|
Mark W.
Member Sponsor Member Joined: 09 Nov. 2014 Location: Silverton, OR Status: Offline Points: 7986 |
Post Options
Thanks(0)
|
I went a different way open D25 and 30 spline flanged D44 with an Eaton E locker. Arming switch on the dash below the speedo and an actuater switch on the shifter. Did a little testing over Memorial weekend worked great.
|
|
Chug A Lug
1948 2A Body Customized 1949 3A W/S 1957 CJ5 Frame Modified Late 50's 134L 9.25"clutch T90A D18 (1.25") D44/30 flanged E-Locker D25 5.38 Since 1962 |
|
jeepsterjim
Member Joined: 13 July 2011 Location: lincoln, ca Status: Online Points: 1283 |
Post Options
Thanks(0)
|
have power loks front and rear. Installed Ford Fusion rear disc brakes with electric E-brakes which can be used as cutting brakes that just might help in certain traction situations.
|
|
Jim
CJ-2A - 81299 |
|
Nothing Special
Member Joined: 02 Feb. 2018 Location: Roseville, MN Status: Offline Points: 845 |
Post Options
Thanks(0)
|
I would not think that a Powr Lok, or any other clutch-type limited slip would be best at treading lightly. Good. Probably even second best. But not best.
In most situations they will be better than most lockers (automatic or selectable). Unless you are going in a straight line selectables guarantee you are going to scuff tires. And unless you are going in a straight line an auto locker is more likely to spin a tire than even an open diff. It would also often be better than an open diff which would be more likely to spin one tire than the Powr Lok would. However a Powr Lok (or any other brand of clutch-type limited slip) will still spin one tire if it's not tight enough for the traction need. And it will scuff a tire if it's too tight. I think the best diff for treading lightly is a TrueTrac. They will never scuff a tire (like a selectable will or a clutch-type limited slip can). And they are less likely to spin a tire than an open diff or loose clutch-type limited slip. They do have their shortcomings, and for specialized applications they might not be the best choice. But in general they are REALLY good. If I'm not mistaken Wilson is running a TrueTrac.
Edited by Nothing Special - 25 June 2022 at 8:27pm |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |