Shackle Kits |
Post Reply |
Author | |
Spinnas
Member Joined: 24 Apr. 2018 Location: AZ Status: Offline Points: 375 |
Post Options
Thanks(0)
Posted: 11 Apr. 2022 at 10:41am |
Due to interest I am making these shackle kits. I originally only made them for myself and some friends, but people saw them, liked them, and wanted some, so why not. Nothing fancy, just stuff that works: 3/8" side plates, poly bushings with bolt sleeves, spacers to get the shackle plates off the hangers and springs, grade 8 bolts that are properly shouldered on the shank through bolt shackle plates with grade 8 washers, lock washers, and grade C lock nuts. The shackles give 1/2" front lift and 3/4" rear lift and come with everything needed to install on all 4 corners. $190 shipped in the US, message for other locations. Edited by Spinnas - 11 Apr. 2022 at 10:42am |
|
Boomer
Member Joined: 08 Feb. 2021 Location: Fallon Nv. Status: Offline Points: 95 |
Post Options
Thanks(0)
|
Do you have just the poly bushings? Iv orderd from a couple of different places and both have replyed that they are out of stock. Where are you getting them from or iv i can buy a dozen from you?
|
|
Scratch
Member Joined: 30 July 2019 Location: Hudson, WI Status: Offline Points: 1440 |
Post Options
Thanks(0)
|
Nice looking parts. What are you using to cut them?
|
|
43 GPW 93487 Blk
44 GPW 230283 OD 46 CJ2A 50100 Tan 46 CJ2A 77632 Wht 47 CJ2A 141681 Grn 48 CJ2A 156240 Red/Yel 48 CJ2A "Lefty" 181341 Red 61 CJ5 123120 Tan 03 TJ Inca Gld |
|
Spinnas
Member Joined: 24 Apr. 2018 Location: AZ Status: Offline Points: 375 |
Post Options
Thanks(0)
|
Negative. I ordered 300 of them and have been waiting for awhile to complete another set of shackle kits. They make them to order which is why they are never in stock. I was told 12 weeks at the time, and right now expecting them in 2 weeks which is earlier than thought.
|
|
Spinnas
Member Joined: 24 Apr. 2018 Location: AZ Status: Offline Points: 375 |
Post Options
Thanks(0)
|
Thanks, laser beams
|
|
Boomer
Member Joined: 08 Feb. 2021 Location: Fallon Nv. Status: Offline Points: 95 |
Post Options
Thanks(0)
|
Since nobody has the poly bushings avible Im going to order some poly rods from mcmaster, carr. and just turn them down and bore out the middle.... A 3ft peice of 1.5 in solid rod is about 20 bucks. shouldnt take long to turn out with a lathe.
|
|
48cj2a
Bantam Trailer Moderator Sponsor Member Joined: 22 July 2005 Location: Central, IL Status: Offline Points: 4512 |
Post Options
Thanks(0)
|
Are you searching early CJ5 55-75 for your bushings?
Summit shows 10 sets in stock: https://www.summitracing.com/parts/ens-2-2101g/make/jeep/model/cj5 Summit shows 4 in stock (two set required with Rancho): https://www.summitracing.com/parts/ran-rs973/make/jeep/model/cj5 |
|
Art C USAF (Retired)
47 CJ2A #134955 Project 48 CJ2A #206759 62 L6226 Station Wagon #58167 10900 45 T3-C #191 Project http://www.bantamt3c.com http://www.48cj2a.com |
|
Boomer
Member Joined: 08 Feb. 2021 Location: Fallon Nv. Status: Offline Points: 95 |
Post Options
Thanks(0)
|
Yes im ordering the correct bushings.... problem is that I have order these from summitt a couple of times over the last 3 or 4 months even they are showing 10 to 20 items in stock only to get a message a few days later to inform me that they are out of stock.
|
|
MrE87
Member Joined: 23 Oct. 2023 Location: NorCal Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Are you still selling these kits? Hard to find a complete kit anywhere and looking to start my wish list for my recently purchased CJ. Thx!
|
|
Oldpappy
Member Joined: 09 Apr. 2018 Location: Tennessee Status: Offline Points: 4815 |
Post Options
Thanks(0)
|
I bought a set of these from Ryan, they are very nicely made.
|
|
If you can't get there in a Jeep you don't need to be there!
|
|
Spinnas
Member Joined: 24 Apr. 2018 Location: AZ Status: Offline Points: 375 |
Post Options
Thanks(0)
|
Yep! Been out of town but will confirm later today if I have some in stock.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |