![]() |
![]() |
Walcks sending unit |
Post Reply ![]() |
Author | |
ricco ![]() Member ![]() ![]() Sponsor Member x 2 Joined: 09 Apr. 2007 Location: Olathe, Kansas Status: Offline Points: 1414 |
![]() ![]() ![]() ![]() ![]() Posted: 23 July 2011 at 3:22pm |
Kudo's to Walck's...I ordered a new fuel sending unit the other day from them. I replaced a standard reproduction one that never really worked because of internal failure, but it had been too long since ordered to make any claim for replacement. Anyway, when I talked with them they told me they were charging a little more than the standard ones you can find online (38) as they have replaced the plastic float with a brass float. It looked great when I got it...and more importantly...it works! The one I pulled out (with plastic float) was half full of gas! Hopefully it will live a longer life because of their desire to improve on present day standard issue stuff. I appreciate that about their business. |
|
She can dance a cajun rhythm....jump like a Willy's in four wheel drive...("Sugar Magnolia")
'48 CJ2A #204845 "Lumpy" |
|
![]() |
|
mix4coal ![]() Member ![]() ![]() Joined: 21 Feb. 2007 Location: Walled Lake, MI Status: Offline Points: 658 |
![]() ![]() ![]() ![]() ![]() |
I am in need of a sending unit to replace my gauge made of a twig. Glad Carl is stepping up to improve on the poorly made chinese parts. Walcks come thru again. You dont have a picture do you?
|
|
'47 CJ2A # 104985
Bantam Trailer 1953 Dodge M37 1948 1 1/2-2 1/2HP IHC LB 1929 1 1/2 HP SATTLEY HIT MISS Carpe Diem!! |
|
![]() |
|
ricco ![]() Member ![]() ![]() Sponsor Member x 2 Joined: 09 Apr. 2007 Location: Olathe, Kansas Status: Offline Points: 1414 |
![]() ![]() ![]() ![]() ![]() |
Damn, I knew someone would ask me that! No, I didn't think about it...I was just happy to get it and hurried to put it in. But, it is identical to the one I replaced with the brass float being the exception.
|
|
She can dance a cajun rhythm....jump like a Willy's in four wheel drive...("Sugar Magnolia")
'48 CJ2A #204845 "Lumpy" |
|
![]() |
|
rocketeer ![]() Member ![]() ![]() Sponsor Member Joined: 26 June 2008 Location: Lehighton, PA Status: Offline Points: 3473 |
![]() ![]() ![]() ![]() ![]() |
For those with a replacement sending unit with a plastic float - As a lot of you know the repro gas gauge sending unit comes with a plastic float that almost always will develop pinholes and leak after a short period. Here's a tip. Before you put that gauge in the tank, go to your local Ford dealer and ask for part number COAZ/9202/B, Float Assembly. It'll cost you approx $8 plus tax and it's brass! It's a perfect fit. Put one on your gauge before you install it and you won't have to worry about suddenly finding your dash gauge always reading empty.
Larry |
|
![]() |
|
mix4coal ![]() Member ![]() ![]() Joined: 21 Feb. 2007 Location: Walled Lake, MI Status: Offline Points: 658 |
![]() ![]() ![]() ![]() ![]() |
Carl is only charging $8 more for his gauge over other suppliers with the plastic float so he is very reasonable. Thanks for the info Larry.
|
|
'47 CJ2A # 104985
Bantam Trailer 1953 Dodge M37 1948 1 1/2-2 1/2HP IHC LB 1929 1 1/2 HP SATTLEY HIT MISS Carpe Diem!! |
|
![]() |
|
Ritt ![]() Member ![]() ![]() Joined: 20 July 2005 Location: Bethel CT Status: Offline Points: 1989 |
![]() ![]() ![]() ![]() ![]() |
Great info. I don't know how many times I've rechecked my wiring to finally give up. I carry a stick also.
![]() |
|
Rit
1948 2A, "RAISIN COOKIES THAT LOOK LIKE CHOCOLATE CHIP COOKIES ARE THE MAIN REASON I HAVE TRUST ISSUES" |
|
![]() |
|
M_Yehling ![]() Member ![]() Joined: 15 Oct. 2005 Location: Arizona Status: Offline Points: 8 |
![]() ![]() ![]() ![]() ![]() |
Just a quick questions while we are on this subject, do you use any kind of sealer on the gasket between the unit and the tank?
|
|
![]() |
|
flattiesrule ![]() Member ![]() ![]() Sponsor Member Joined: 02 June 2010 Location: Payson, Az. Status: Offline Points: 296 |
![]() ![]() ![]() ![]() ![]() |
I did. Used a fuel resistant RTV (can't remember what brand) as an 'extra' assurance. No seepage, no fumes.
|
|
'47 cj2a
'76 cj7 '01 cherokee sport |
|
![]() |
|
Ritt ![]() Member ![]() ![]() Joined: 20 July 2005 Location: Bethel CT Status: Offline Points: 1989 |
![]() ![]() ![]() ![]() ![]() |
Mine leaks when I really fill to top, just something I have to get to.
|
|
Rit
1948 2A, "RAISIN COOKIES THAT LOOK LIKE CHOCOLATE CHIP COOKIES ARE THE MAIN REASON I HAVE TRUST ISSUES" |
|
![]() |
|
ovrlnd ![]() Member ![]() ![]() Joined: 18 Feb. 2008 Location: MIchigan Status: Offline Points: 1746 |
![]() ![]() ![]() ![]() ![]() |
my plastic leaked too. got a cork from the local hardware that fit in there.
|
|
![]() |
|
binsk ![]() Member ![]() ![]() Joined: 14 June 2011 Location: San Jose CA Status: Offline Points: 28 |
![]() ![]() ![]() ![]() ![]() |
Thanks for posting that Ford part number. Took some scouring--some places are selling the part for over $30--but I found it online for $8 online today and purchased one. Pretty stoked to have a working gas gauge.
|
|
![]() |
|
TERRY ![]() Member ![]() ![]() Sponsor Member Joined: 22 May 2007 Location: BOULDER COLORADO Status: Offline Points: 3401 |
![]() ![]() ![]() ![]() ![]() |
$4.95 at macsautoparts.com
|
|
BOULDER 48 2A
|
|
![]() |
|
harvey45 ![]() Member ![]() ![]() Joined: 14 June 2011 Status: Offline Points: 360 |
![]() ![]() ![]() ![]() ![]() |
Pete Debella will be offering a reproduction sending unit with the rectangle top as original with cork in June to mid July of 2013 http://www.debellajeepparts.com
|
|
![]() |
|
ndnchf ![]() Member ![]() ![]() Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
![]() ![]() ![]() ![]() ![]() |
Old thread but I thought I add my thumbs up for Walck's brass float sending unit. I installed one over the winter (along with a ground wire) and it works great. Well worth the few extra dollars.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
![]() |
|
Oilleaker1 ![]() Member ![]() Joined: 06 Sep. 2011 Location: Black Hills, SD Status: Offline Points: 4412 |
![]() ![]() ![]() ![]() ![]() |
Warning, never use silicone sealant on any gas application. Fuel resistant? If it squeezes a ring inwards, it falls off into the tank and you will find it plugging your fuel line sooner or later. In gas, it expands to almost a pencil size. If you remove it and let it dry, it's 1/4 that size when dry. Ask me how I know this?????
![]() I use permatex # 2 sealant now. Amen. Oilly
|
|
Green Disease, Jeeps, Old Iron!
|
|
![]() |
|
swmoboy ![]() Member ![]() Joined: 17 Nov. 2014 Location: Springfield, MO Status: Offline Points: 135 |
![]() ![]() ![]() ![]() ![]() |
This post was perfect timing for me as I was just on Walcks's site looking at their CJ2a fuel sending unit. I noticed it was brass and not the usual plastic I have seen in the past at various suppliers. Pretty much sold me. Thanks. On a side note, I've been out of action for a while now due to health and life happening. I'm starting to get back in the groove. Thanks to all for their encouragement.
|
|
1947 CJ2a #155307
|
|
![]() |
|
ndnchf ![]() Member ![]() ![]() Sponsor Member x 2 Joined: 22 Sep. 2017 Location: Virginia Status: Offline Points: 2177 |
![]() ![]() ![]() ![]() ![]() |
I've been using Walck's brass float unit for better part of a year. It's been great.
|
|
1948 CJ2A - It goes nowhere fast, but anywhere slow.
|
|
![]() |
Post Reply ![]() |
|
Tweet |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |