wtb Governor setup - **all set** |
Post Reply | Page 12> |
Author | |||
mbullism
Member Sponsor Member x 4 Joined: 29 May 2015 Location: MA Status: Offline Points: 4760 |
Post Options
Thanks(0)
Posted: 03 Aug. 2021 at 7:30am |
||
Like it says, whatchagot? I'd prefer complete to having to search bits, but open to anything really. Just seeing if there is anything around.
TIA, MB
Edited by mbullism - 01 Nov. 2021 at 6:50pm |
|||
Those who do not learn from history are doomed to repeat it... Welcome to 1930's Germany
|
|||
JAB
Member Joined: 21 Mar. 2019 Location: WI 53153 Status: Offline Points: 168 |
Post Options
Thanks(0)
|
||
I just removed one from a genset yesterday because I'm using the engine in a 2A or GPW (haven't decided yet). Don't know anything about it though, but it seems complete and I don't need it. I'd be happy to place everything back into position and take some pictures for you. It might all fit inside a Flat Rate box too.
|
|||
GR8GPN2U!
|
|||
mbullism
Member Sponsor Member x 4 Joined: 29 May 2015 Location: MA Status: Offline Points: 4760 |
Post Options
Thanks(0)
|
||
Much appreciated, JAB. No need to reassemble anything... if you'd like to snap a quick pic and PM it that'd be appreciated (and just to rule out the zebra, lol) but a genset most likely had a single speed governor on it, I'm looking for a variable speed setup that would have been on a late 46 2a
|
|||
Those who do not learn from history are doomed to repeat it... Welcome to 1930's Germany
|
|||
Lee MN
Member Joined: 13 Aug. 2008 Location: Harris, MN Status: Offline Points: 4923 |
Post Options
Thanks(0)
|
||
Just a heads up, the generator governor is a “Fixed Speed” unit, the Ag governor is a multi-speed unit. Lee😉 |
|||
LEE
44 GPW-The Perfected Willys 49 2A “If you wait, you only get older” 67 M715 American Made Rolling History |
|||
mbullism
Member Sponsor Member x 4 Joined: 29 May 2015 Location: MA Status: Offline Points: 4760 |
Post Options
Thanks(0)
|
||
Lol... potato-patawhto
Edited by mbullism - 03 Aug. 2021 at 12:36pm |
|||
Those who do not learn from history are doomed to repeat it... Welcome to 1930's Germany
|
|||
OnlyOneDR
Member Joined: 05 July 2016 Location: R Status: Offline Points: 456 |
Post Options
Thanks(0)
|
||
I would be interested in the single-speed governor. I can shoot you a PM.
|
|||
Searching for time to put it all together...
1950 CJ-3A #37751 In Pieces 1969 Chevy Blazer Resto-Mod Waiting for its day... 2001 Nissan Frontier Crawler Adventure Rig |
|||
JAB
Member Joined: 21 Mar. 2019 Location: WI 53153 Status: Offline Points: 168 |
Post Options
Thanks(0)
|
||
Great! I’m headed to the shop now to get some pictures.
|
|||
GR8GPN2U!
|
|||
ggordon49
Member Sponsor Member Joined: 30 June 2017 Location: Connecticut Status: Offline Points: 1436 |
Post Options
Thanks(0)
|
||
PM inbound
|
|||
- Don't Let The Fatherless Ones Grind You Down -
- I like them stock, survivor's with original paint are my favorites - |
|||
JAB
Member Joined: 21 Mar. 2019 Location: WI 53153 Status: Offline Points: 168 |
Post Options
Thanks(0)
|
||
Sorry about the delay, I was conscripted into kid duty. I'm posting here this time rather than responding to the PM's because several people requested info and I can cover you all at once this way. The first guy to post has first dibbs, and then on down. Here's what it is. Let me know what parts you need (carb, linkage, brackets, etc.) and we can come up with a fair price. I'm trying to include pictures of the oiling sytem, brackets, linkages, etc. It's already removed so you'll need some imagination. The idler (not pictured) takes the place of a generator and is not part of the governor system, but I don't need it so it's also available, as is the unique carb. My understanding of these genset engines is that they're basically the same as any equivalent CJ engine with a smaller (not suitable for a jeep) carb and intake runners designed to run at 1800 RPM's, or idle. The bottom oil line on the governor dumped into the valve cover. I'll have to compare, but the valve cover may either be unique to governed motors, or a normal one flipped up-side-down to accomodate the PCV valve on the right (rear of the engine) and the governor drain on the left (front). If that's the case, we may have to trade that part (mine for yours), after I verify this assumption and check my stash of extra parts. The copper line from the bottom of the oilfilter tee went to the top fitting on the governor. The belt goes on the inside sheave/pulley on the crankshaft. I can post better pictures of anything specific you guys need.
Edited by JAB - 04 Aug. 2021 at 2:28pm |
|||
GR8GPN2U!
|
|||
OnlyOneDR
Member Joined: 05 July 2016 Location: R Status: Offline Points: 456 |
Post Options
Thanks(0)
|
||
Still interested but only for the governor and bracket. Not interested in parts swapping, however.
|
|||
Searching for time to put it all together...
1950 CJ-3A #37751 In Pieces 1969 Chevy Blazer Resto-Mod Waiting for its day... 2001 Nissan Frontier Crawler Adventure Rig |
|||
3-48s
Member Joined: 18 Sep. 2008 Location: Upstate, NY Status: Offline Points: 2780 |
Post Options
Thanks(0)
|
||
Good Day Mike, Which governor setup are you looking for? A King Seeley. A Monarch or A NOVI????? That makes a big difference in the purchase price as the KS will be $$$$$$$, The Monarch will be $$$$ & the NOVI will be $$$. Unless yo choose to purchase from a certain vendor, then they will all be $$$$$$$$$$$$$! |
|||
1945 CJ2A #10536
1948 CJ2A #176528 "Elmer" 1948 CJ2A #155970 "Gray Mule" 1948 CJ2A #155365 "Old Yeller" (GONE) BANTAM T3C # 6147 (GONE) BANTAM T3C # 30856 |
|||
JAB
Member Joined: 21 Mar. 2019 Location: WI 53153 Status: Offline Points: 168 |
Post Options
Thanks(0)
|
||
I posted the pictures. Assuming it's not what you want I've moved to PM's.
Edited by JAB - 04 Aug. 2021 at 4:49pm |
|||
GR8GPN2U!
|
|||
mbullism
Member Sponsor Member x 4 Joined: 29 May 2015 Location: MA Status: Offline Points: 4760 |
Post Options
Thanks(0)
|
||
You gotta know everyone wants to pay $/2 My 2A is late oct / early nov '46, so I'm pretty sure any of the big three would be "correct". As for which one and how much is really a moot point if I can't shake one loose somewhere, but once past that it's a "$ x X" conversation I guess. Which model in what condition and how complete would determine "X", yada yada-
|
|||
Those who do not learn from history are doomed to repeat it... Welcome to 1930's Germany
|
|||
timcj2a
Member Sponsor Member Joined: 19 July 2005 Location: Chula Vista, CA. Status: Offline Points: 801 |
Post Options
Thanks(0)
|
||
Mike,
As we've discussed many times before, there were so many different parts installed from one jeep to the next. For what it's worth #69376 has a Monarch. Tim
|
|||
mbullism
Member Sponsor Member x 4 Joined: 29 May 2015 Location: MA Status: Offline Points: 4760 |
Post Options
Thanks(0)
|
||
The data point is appreciated ...not ruling anything out.
|
|||
Those who do not learn from history are doomed to repeat it... Welcome to 1930's Germany
|
|||
Qcanuck
Member Joined: 04 Sep. 2013 Location: Ottawa, ON Status: Offline Points: 421 |
Post Options
Thanks(0)
|
||
I have a pierce governor off an M38 which I will sell you for $150, including shipping. It is a stationary governor.
Call or text to discuss at 343 777 4971. QW |
|||
mbullism
Member Sponsor Member x 4 Joined: 29 May 2015 Location: MA Status: Offline Points: 4760 |
Post Options
Thanks(0)
|
||
Thanks, QW... as noted above looking for a variab-...er... multi-speed set up
|
|||
Those who do not learn from history are doomed to repeat it... Welcome to 1930's Germany
|
|||
Qcanuck
Member Joined: 04 Sep. 2013 Location: Ottawa, ON Status: Offline Points: 421 |
Post Options
Thanks(0)
|
||
That having been said I have some spare parts left over from when I rebuilt my Monarch.
|
|||
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |