The Old CJ2A Page Message Archive

Please see Questions and Answers for some topics that frequently appear on this board. As you can see, this board loads rather slowly. If you are posting something for sale, please remember to include your location since someone who might otherwise be interested might not be able to use a part or a vehicle that is too far away. Posting your location when you're selling something that needs to be hauled will save everyone's time (and reduce the number of posts on this already too-slow message board). Thanks.

Questions and Answers
Return to The CJ2A Home Page
Re: Balast Resister

[ The Old CJ2A Page Message Archive ]

Posted by ed on July 10, 2005 at 20:29:50:

In Reply to: Posted by on July 10, 2005 at 12:59:07:

: The balast resister is in; the Jeep runs fine, and hopefully the points will last longer.

: Thanks for the advice Ed; I wired the resister between the coil and the points. I found the perfect place to mount the resister; the bracket that goes between the oil bath air cleaner and the fire wall already has a hole in it (on the side towards the engine, near the top). My coil is mounts to the block. I spent more on the soder and flux than I did on the resister and the slide on end fittings.

: Thanks again guys.

: Gary

Good luck I hope it does you well

Follow Ups

[ The Old CJ2A Page Message Archive ]